# Shumanet-Thermo

- Link: https://uzbuild.com/en/shumanet-thermo-2/
- Published: 2024-01-04T10:55:02+05:00
- Author: admin

#### 󠀁[Characteristics](https://uzbuild.com/en/shumanet-thermo-2/#1704280275702-aa3f1cf6-5a58)󠁿

 * Length of the canvas – 7 m;
 * Canvas width – 1.4 m;
 * Web thickness – 9 mm;
 * Package weight: 14.5 kg.

### Physical and technical characteristics

 * Thermal conductivity – no more than 0.027 W/(m.K);
 * Reduction of the reduced impact noise level ∆Lnw under a leveling screed with
   a surface density of 120 kg/m2: Shumanet-Thermo – 31 dB;
 * The sound absorption index αw at a distance of 40 mm from the hard surface is
   0.6.

#### 󠀁[Installation](https://uzbuild.com/en/shumanet-thermo-2/#1704280572038-8d3547d7-1889)󠁿

 * Before installing a floor structure using Shumanet-Thermo, the base must be thoroughly
   cleared of construction debris. The base must be level, and any protruding elements
   such as reinforcement or concrete overhangs must be removed.
 * Shumanet-Termo is laid on the prepared base, overlapping the joints of adjacent
   sheets of material by at least 100 mm. The material must be extended onto the
   walls to a height slightly greater than the height of the screed being installed.
   Joints between adjacent sheets are sealed with reinforced tape. Before installing
   the screed, the surface of the material is covered with a separating layer of
   polyethylene film, which is also applied to all vertical surfaces.
 * Next, a cement-sand screed is installed using sand concrete grade M300 or higher
   or ready-mix concrete at least 60 mm thick. The screed must be reinforced with
   a metal mesh with a mesh size of 50×50 mm and a rod diameter of 4 mm. The mesh
   should be positioned in the lower third of the screed, 15-20 mm above the Shumanet-
   Termo material.
 * For large floor surfaces, the screed is applied in sections no larger than 30
   m², with expansion joints required. Shumanet-Thermo or Vibrostek-M edge tape 
   in two layers can be used in expansion joint areas.
 * After the screed has set, any excess Shumanet-Termo material protruding around
   the perimeter is trimmed with a utility knife. The resulting joints are filled
   with Vibrosil vibroacoustic sealant.

#### 󠀁[Documents](https://uzbuild.com/en/shumanet-thermo-2/#1703053158754-6b20a25b-e7d6)󠁿

[[[Technical sheet Shumanet-Thermo](https://www.acoustic.ru/data/pdf_files/Shumanet_Termo.pdf)

[[[Download all certificates in one archive](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/ru_417.zip)

### Certificates and patents (Russia)

#### Report on measurements of the reduced impact noise level for structures made with Shumanet-Thermo material

#### 󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[

[[[Shumanet-Thermo. Report on the measurement of the equivalent impact noise level for structures made with Shumanet-Thermo material.](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/1700.pdf)

#### Laboratory test reports on the sound-absorbing properties of Shumanet-Thermo material

#### 󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[

[[[Shumanet-Thermo. Laboratory test reports for the sound-absorbing properties of Shumanet-Thermo material.](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/1695.pdf)

#### Laboratory test report on the sound-absorbing properties of Shumanet-Thermo material

#### 󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[󠀁[

[[[Shumanet-Thermo. Laboratory test report on the sound-absorbing properties of Shumanet-Thermo material.](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/1696.pdf)

#### Fire Safety Declaration

[[

[[[Shumanet-Termo. Fire Safety Declaration](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/1851.pdf)

#### Expert opinion

#### 󠀁[󠀁[󠀁[󠀁[

[[[Shumanet-Thermo. Expert opinion](https://www.acoustic.ru/data/goodscatalog/goods/417/certs/1705.pdf)