Specifically designed for sealed, high-risk areas in healthcare settings where air pressure is controlled to prevent the spread of infections, such as operating rooms, recovery rooms, and intensive care units.
Does not support the growth of staphylococcus (MRSA) and has low particle emissions (ISO Class 3).
Standard detergents are used for cleaning and can be effectively disinfected with steam cleaning.
Class B sound absorption and high fire safety rating (Class A1/KM2).
A-line edge is available in standard sizes.
Stone wool panel.
Face: water-repellent white surface.
Rear: high-performance air-impermeable membrane.
Sealed edges.
Sound absorption is measured in accordance with ISO 354.
Sound absorption data α p, α w and absorption class are calculated in accordance with ISO 11654. Sound absorption properties of islands and baffles are quantified by the equivalent sound absorption area A eq expressed as m² per item.
Fire safety A1, (EN 13501-1) Fire hazard class – KM1 (Federal Law No. 123) (EN 13501-1)
Reflection and scattering of light light reflection 85%
Moisture resistance: Up to 100% relative humidity. No visible sagging at high humidity.
Surface durability Increased strength and dirt resistance
Cleaning: Vacuum, Soft cloth, Dry cleaning with steam (twice a year), Chemical resistance: Resistant to dilute solutions of ammonia, chlorine, quaternary ammonium and hydrogen peroxide.
Hygiene Stone wool has no nutritional value, therefore it does not support the development of harmful microorganisms.
Clean rooms 3
Air Pressure: Suitable for areas where air pressure is controlled to prevent the spread of infection. The high-performance membrane and sealed edges, combined with HDC2 clips (8 clips per 600 x 600 mm panel), ensure an air leakage rate of less than 0.5 m³/h/m²/Pa in a pressure range of 5 to 40 Pa. Rockfon recommends using a special neoprene tape for the suspension system or a special sealant in applications with more stringent air pressure requirements.
Bacteriological Class M1, NF S 90-351:2013
Environment Fully recyclable product
Indoor environment A selection of Rockfon products have been awarded the M1 (Finland) particle emission class for building materials and the Danish Indoor Climate Label (Denmark) – a symbol for the indoor climate of products with low particle emissions.
Sound absorption is measured in accordance with ISO 354.
Sound absorption data α p, α w and absorption class are calculated in accordance with ISO 11654. Sound absorption properties of islands and baffles are quantified by the equivalent sound absorption area A eq expressed as m² per item.
Fire safety A1, (EN 13501-1) Fire hazard class – KM1 (Federal Law No. 123) (EN 13501-1)
Reflection and scattering of light light reflection 85%
Moisture resistance: Up to 100% relative humidity. No visible sagging at high humidity.
Surface durability Increased strength and dirt resistance
Cleaning: Vacuum, Soft cloth, Dry cleaning with steam (twice a year), Chemical resistance: Resistant to dilute solutions of ammonia, chlorine, quaternary ammonium and hydrogen peroxide.
Hygiene Stone wool has no nutritional value, therefore it does not support the development of harmful microorganisms.
Clean rooms 3
Air Pressure: Suitable for areas where air pressure is controlled to prevent the spread of infection. The high-performance membrane and sealed edges, combined with HDC2 clips (8 clips per 600 x 600 mm panel), ensure an air leakage rate of less than 0.5 m³/h/m²/Pa in a pressure range of 5 to 40 Pa. Rockfon recommends using a special neoprene tape for the suspension system or a special sealant in applications with more stringent air pressure requirements.
Bacteriological Class M1, NF S 90-351:2013
Environment Fully recyclable product
Indoor environment A selection of Rockfon products have been awarded the M1 (Finland) particle emission class for building materials and the Danish Indoor Climate Label (Denmark) – a symbol for the indoor climate of products with low particle emissions.
